Construction consolidation products allow you to reinforce, consolidate and rehabilitate damaged walls, resulting in a static improvement of existing structures and the safety of buildings.

They are also used in seismic adaptation measures and offer excellent performance.

Construction consolidation products include various types of mortars, mixes and networks that can be used to easily and effectively counteract the static degradation of buildings and their lack of load-bearing capacity.

Heres consolidation products are characterized by their special formulation based on natural components, are compatible with the existing masonry and are breathable.

H-63 P / Microinjection mixture

H-63 P is a premixed grout with a grain size of less than 20 μ with high fluidity and good workability retention.
In the plastic phase it is expansive to ensure the filling of cavities and small voids.
It can be easily injected even into the smallest cracks.
The total absence of cement makes the solidifying product compatible with the masonry to be solidified.
In addition, it does not contain free lime to avoid the risk of efflorescence.
It also does not contain sulphates, chlorides, nitrates, potassium and sodium, which can lead to chemical-physical degradation associated with the formation of salts.
The grout allows the masonry to breathe sufficiently and has a very low hydration temperature to prevent the formation of cracks.

H-64 P / Mixture of lime and pozzolan specifically for microinjection to consolidate plasters and surfaces

H-64 P is a low-density mixture specifically designed for the manufacture of a strengthening mortar.
The strengthening product is injected into the cavities between masonry and plaster or between plaster and plaster. It allows you to achieve a consolidation of the whole.

OPUS SRG / Structural mortar

Ready-to-use structural, rheoplastic, anti-shrinkage, fibre-reinforced mortar with high mechanical resistance, based on a recipe based on natural hydraulic lime NHL3.5, natural pozzolan and selected Cocciopesto aggregates with a grain size of up to mm. 1.4.

RC-06 / Structural plaster

The ready-to-use organic plaster base with structural properties is used for the structural rehabilitation of dilapidated walls both indoors and outdoors.
It can be applied by hand or by machine.
It is a naturally organic consolidating product, very breathable with pozzolanic support and low in soluble salts.
The grout is a compound based on air lime, NHL-5 lime, marble aggregates and granular cocciopesto, reinforcing fibers and controlled shrinkage.

RC-07 / Structural plaster

The high-strength, ready-to-use mortar is used for structural reinforcement with thin-layer fillers, 5 - 10 mm, for the renovation of damaged walls and for bedding
It is particularly suitable for reinforcement circuits with fiber-reinforced systems and reinforcement mats
The consolidation product is naturally organic and based on air lime, NHL-5 lime, marble aggregates, cereal cocciopesto, reinforcing fibers and controlled shrinkage
It is very breathable, has a pozzolanic grip and has a low content of soluble salts

RC-10 / Old Walls

Pozzolanic setting masonry and bedding mortar is particularly suitable for soft brick and natural stone masonry
It is effectively used both in the repair and renovation of existing walls
It has a low content of soluble salts and is available in different colors according to the color chart or based on specific sample requirements
It is mass-colored with cocciopesto and earth

RC - 10 R

Thixotropic mortar based on natural hydraulic lime NHL 3
5, moldable, with controlled shrinkage, specific for the recovery, conservative restoration, reconstruction, repair and restoration of cornices, moldings, friezes, capitals, pilasters or overhanging architectural details
Due to its natural characteristics and color, it is particularly suitable for interventions in buildings of historical and artistic interest or for environmentally friendly Green Building interventions