Dehumidifying plaster is an effective remedy for the rehabilitation of damp walls affected by rising damp and salt efflorescence.
The products are made of completely biocompatible mixtures: they promote the natural evaporation of water from the masonry to the outside and the elimination of salts.
Heres offers a complete range of solutions for dehumidifying plaster and rehabilitation products that can be applied according to the situation.
RC-01 / Sacrificial plaster for salt extraction
The dehumidifying plaster works like a sponge to remove moisture and salts from the walls to be restored.
After some time, it was torn down and replaced with permanent plaster.
It consists of a mixture of selected natural materials to create an archaic, coarse and thin plaster that is applied as a coarse layer with a thickness of 2 - 4 cm.
After some time, it was torn down and replaced with permanent plaster.
It consists of a mixture of selected natural materials to create an archaic, coarse and thin plaster that is applied as a coarse layer with a thickness of 2 - 4 cm.
RC DESAL – Salt Extractor
The environmentally friendly salt extractor works like a paper towel.
Removes water-soluble salts from bricks, plaster, stones, floors.
The mixture is free of unnatural chemicals.
Removes water-soluble salts from bricks, plaster, stones, floors.
The mixture is free of unnatural chemicals.
H-Salistop
The anti-salt has a special formulation to prevent salt efflorescence on wall surfaces.
It acts as an encapsulator of salts, especially calcium and magnesium.
It prevents the formation and formation of classic superficial white spots.
It also blocks the penetration of moisture and water, thus improving surface protection.
It is used in combination with the application of the dehumidification and rehabilitation cycle of mortar and plaster.
It acts as an encapsulator of salts, especially calcium and magnesium.
It prevents the formation and formation of classic superficial white spots.
It also blocks the penetration of moisture and water, thus improving surface protection.
It is used in combination with the application of the dehumidification and rehabilitation cycle of mortar and plaster.
RC-36 / Anti-salt Filter
The product acts as a salt filter, preventing or limiting their migration from the masonry to the new plaster.
Prevents the formation and formation of classic salt efflorescence.
RC-36 is a mixture that is mixed with clean water to obtain a slurry that is applied before the dehumidification and renovation plastering circuit.
Prevents the formation and formation of classic salt efflorescence.
RC-36 is a mixture that is mixed with clean water to obtain a slurry that is applied before the dehumidification and renovation plastering circuit.
RC-02 / First-Hand Rendering
The mixture is used to make interior and exterior plasters that improve the adhesion of mortar to difficult-to-plaster surfaces.
It is cement-free.
It is cement-free.
RC-04 / Restorative Dehumidifying Plaster
Dehumidifying plaster is an excellent humidity regulator and ensures rapid drainage of excess moisture in the walls, maintaining excellent resistance to the corrosive action of crystallized salts.
It is produced with a mixture of selected cocciopesto, slaked lime, natural hydraulic lime NHL 3.
5, marble aggregates in suitable curve and special natural aggregates.
It is produced with a mixture of selected cocciopesto, slaked lime, natural hydraulic lime NHL 3.
5, marble aggregates in suitable curve and special natural aggregates.
